Features: *Super sharp #11 Blades*Used for cutting or trimming plastic*Blade case and 5 blades included *Made In Taiwan *Cars, parts, accessories & others are not included.*

Features: *High quality seal for .21 & .28 size engine*Good seal between the tuned pipe & manifold *Made In Taiwan *Cars, parts, accessories & others are not included.* Size:              .21 & .28 engine & manifold

Features: *The same weight rating (thickness) as that of Team Associated*100% pure silicone oil*Large 70ml capacity*Will not thin out in hot weather or thicken up in cold weather*Designed threaded white cap for high viscosity diff oil Thickness is the same above 60000CST.100000cst AE System...

Features: *Specially hardened pins for drive shafts*A sweet container included *Made In Taiwan *Cars, parts, accessories & others are not included.*

Features: *Extremely light, only 987g (compared with other 1400~1700g boards at the same size)*Lighter than most same size carbon fiber setup boards.*400x480x10mm size is excellent for 1/10 & 1/8 on-road car, buggy & smaller cars.*Flat surface for fine setup*Fit most car bags with a setup board...

Features: *A precise droop guage to check the droop in range 60~140mm*Quickly and accurately measure the droop by mounting the gauge to your upper shock nut*Precise scale engraved on both sides for quick check*CNC-machined from lightweight aluminum material*Excellent for 1/8 & 1/10 off-road &...

Features: *Two shock stands included for 1/10 & 1/8 Off-Road*A serious must-have tool for shock setup*Electric-powered vacuum pump for the best performance*Simplify the shock assembly process*Remove air bubbles quickly*Powered by 5V~8.4V DC power source (not included)*50cm connecting cable with 4mm banana plugs included*Cardboard box...

Features: *Speically designed for 1/10 & 1/8 on-road / sedan / touring /drift car shocks*A serious must-have tool for shock setup*Electric-powered vacuum pump for the best performance*Simplify the shock assembly process*Remove air bubbles quickly*Pressure -50 kPa (5v)*Powered by 5V~8.4V DC power source (not included)*50cm...

The KOS32243 opens from the front, with the car sitting in the top compartment and everything else — tool boxes, battery packs, tires — organized in the bottom. A partition plate divides the bottom into two sections so your gear stays sorted. The included...

The KOS32219 was designed from the ground up for 1/10 RC cars — not adapted from a generic backpack. The main compartment features a movable partition: transmitter on top, car below. For longer touring or drift cars, the partition pins to the inner wall...

Features: *Strong, reinforced, waterproof plastic corrugated plastic frame version*Convenient compact size design*Large drawer for 1/10 car, made from strong, reinforced, waterproof material*2 Medium drawers for parts & accessories, made from strong, reinforced, waterproof material*Side pockets for manual, setup sheet & other purposes *Made In Taiwan *Cars,...

Features: *Strong, reinforced, waterproof plastic corrugated plastic frame version*Convenient compact size design*Two large drawers for 1/10 car, made from strong, reinforced, waterproof material*Side pockets for manual, setup sheet & other purposes *Made In Taiwan KOS32251 Strong cardboard box frame version is also available. *Cars, parts,...

Features: *Keep all equipment well organized*2 large drawers for 1/10 touring/drift car, made from strong, reinforced, waterproof material*2 Medium drawers for parts & accessories, made from strong, reinforced, waterproof material*Solid reinforced frame structure*Large backside pocket for setup board*2 side zipper pockets included to store parts &...

1/12 & 1/10 On Road Ride Height Gauge (3.0~8.5mm)

Features: *Popular sizes included*A magnet installed*Convenient tip holder included*Lightweight ergonomic composite handle*Long-lasting tool tips*1.5mm, 2.0mm & 2.5mm hex wrench included*5.5mm & 7mm nut driver included *Made In Taiwan COLOR:     Black Tip length: 75mm Handle length: 105mm Total length: 170mm

Features: *Popular sizes included*A magnet installed*Perfect for engine fastening to the engine mount*Convenient tip holder included*Lightweight ergonomic composite handle*Long-lasting tool tips*1.5mm, 2.0mm, 2.5mm & 3.0mm hex wrench included*2mm & 2.5mm ball hex wrench included *Made In Taiwan COLOR:     Black Tip length: 75mm Handle...

Features: *Made from hard & high strength plastics*Perfect professional looking glue job*Side wall design for better gluing*Mount tires quickly and firmly*Simple and efficient*Small and lightweight*Easy to carry*Consistent gluing all the time*A hard paper box included *Made In Taiwan *Cars, parts, accessories & others are...

Features: *Extremely light, only 1333g (compared with other 1900~2200g boards at the same size)*Lighter than most same size carbon fiber setup boards.*455x570x10mm size is excellent for 1/8 on-road car, 1/8 buggy, 1/8 truggy or smaller cars.*Flat surface for fine setup*Decals included*Packed inside a bubble bag for...

Features: *Keep all equipment well organized*1 large drawers for 1/8 buggy & onroad car, made from strong, reinforced, waterproof material*3 Medium drawers for parts & accessories, made from strong, reinforced, waterproof material*1 Small drawer for parts & accessories, made from strong, reinforced, waterproof material*1 Top long drawer...

Features: *Speically designed for 1/8 off-road buggy shocks*Hard EVA case included for great protection*A serious must-have tool for shock setup*Electric-powered vacuum pump for the best performance*Simplify the shock assembly process*Remove air bubbles quickly*Pressure -50 kPa (5v)*Powered by 5V~8.4V DC power source (not included)*50cm connecting...