The HobbyKing Safe 40A Parallel Charge Board allows you to charge four battery packs simultaneously, drastically reducing charge time! The battery packs being charged in parallel need to have the same cell count and be in a similar state of discharge (within 0.2V).  That...

A neat way to power LED's from 3s Lipoly's using the balance plug.** WARNING: Check Polarity of your setup before connecting this harness.

Custom-made cable from the EzOSD to the TBS cameras. Works with TBS69. Great spare part or work-saver.

Graupner Transmitter Adapter Plug 3.5mm to 3.5mm Stereo Plug for Flight Simulator Specs:Plug types: Female 3.5mm to Male 3.5mm Stereo PlugLength: 152mm

Sanwa Transmitter Adapter Plug 3.5mm to Mini DIN-4 for Flight Simulator Specs:Plug types: Female 3.5mm to Male Mini DIN-4 Length: 152mm

This handy charge adapter will connect to any Tamiya, mini Tamiya, T-Connector or micro T-Connector and is made from good quality 12AWG and 16AWG wire. Both T-connectors come with a protective, insulating cap to stop you shorting your packs when using either of the...

Mini Tamiya Connector Male (10pcs/bag)

Female Mini Tamiya <-> Male XT60 (3pcs/bag)

Turnigy SK3 Competition Series motors are the newest addition to our SK3 motor line-up offering the absolute best quality, performance and efficiency for your model on a competition level. Each and every SK3 Competition Series motor is thoroughly inspected and tested to ensure the...

EC2 Female & Male (5pcs/bag)

The all new Turnigy FHSS 2.4GHz transmitter module allows you to bind any trainer port enabled transmitter* with your FBL100 helicopter or Q-Bot Micro quadcopter. It works by using the trainer port's PPM signal from your transmitter. Simply plug this module into your trainer port,...

Features 1 male T-Connector to 1 female T-Connector with a JST Female plug lead connected in parallel. Use this adapter to power a stand-alone BEC, electronic accessory such as cooling fan, LED lights etc...Be aware of the voltage limits of the device you connect to...

This USB udate tool is used for updating the firmware on your OrangeRX transmitter module. This tool is most useful for re-assigning the channel output when using the OrangeRX Futaba compatible TX module with your Futaba transmitter. It will allow you to re-assign the channels to...

The EzUHF 8 channel receiver (lite edition) is a super lightweight 8CH receiver for use with the ImmersionRC EzUHF system. It can provide long range control of your FPV model. Compact Long-Range R/C ReceiverLightweight, single-antenna version of the 8 channel receiver with a similar feature set.Interference Rejection The...

EzUHF has made it even easier to fly with long range UHF, with their plug and play Module. The long-awaited EzUHF module is here, compatible with most radios which use the 'JR' module standard, including the 9XR and the new Taranis. Same features as...

2mm Gold connectors with cut away for easy soldering Package contains 10 PAIRS of connectors. (20pc) Spec.Length: 12.5mm(Each)Diameter: 2mmWeight: 0.4g(Pair)

Standard accessory pack for NTM Prop Drive 42 series motors.CNC Machined (take a close look at the cross mount, even that is machined rather than punched) from billet 6061 alloy for strength and balance.Shaft Diameter: 8mmShaft Length: 26mmCross Plate Bolt Holes: 49mmWeight: 40.1g (Total)

Designed for use with our Multistar 20 or 30 amp esc, this cable simplifies the construction of your Quadcopter power system by allowing you to simply plug the system together - Plug and play style and with zero soldering! This cable comes pre terminated with...

Save pulling the wing or hatch cover off each time you want to turn the radio off.

NTM Rotor Drive, our latest addition to the NTM performance outrunner motor range are high quality brushless outrunner motors designed specifically for use in today's high performance electric model helicopters. The NTM Rotor Drive motors feature high quality, precision made Japanese ball bearings ensuring long life and excellent performance in your high-demand R/C helicopter. They...