HobbyKing™ GT2E 2.4Ghz Receiver 3ChModel: Car/BoatChannels: 3chFrequency band: 2.4GhzRF Receiver Sensitivity: -105dBmModulation: GFSKSystem Type: AFHDS 2ASensitivity: 1024Failsafe: Yes (Channel 2)Power Port: Yes (VCC)Power: 4.5~6.5 VDC  Weight: 5gAntenna Length: 26mmDimensions: 37x22x12mm***Note: This receiver is not compatible with the Turnigy GT5 Surface Radio***

HXT 3.5mm Charge Lead with 4mm Banana Plugs, 14AWG wire, overall length 250mm (1pc)

The latest addition to the XT60 range provides an integrated 5mm mounting hole on the side of a male XT60. This can be used to fix it to a drone frame by threading it over a stand-off or via a cable tie. It could also be...

XT60's have been around for some time now.  These now come with a mounting base that can be screwed down to the mounting base of your drone or any other product that has a solid base. This will make connecting your battery even easier....

Super clean way to connect you RX to a Flight controller or flybar-less unit with a single bundle wire. Taking advantage that only a single power and ground need to be connected between the two devices. A single 3 pin female to female is...

HXT4mm Battery Harness 14AWG for 2 Packs in Series

This adapter will convert a T-Connector equipped battery to an HXT 4mm for use with an HXT 4mm equipped ESC or Charge lead.Spec:Weight: 10g(Each)

EC3 Parallel Adaptor (2pcs per bag)The EC3 Parallel Adaptors allow you to join two batteries together to increase capacity.  The adaptors also prevent adding additional lengths of cable unlike most solutions. The series adaptors are neatly soldered together and heat shrink shielded for a...

EC3 Series Adaptor (2pcs per bag) The EC3 Series Adapters are the perfect solution for the modeller looking to increase voltage and reduce the weight of a model. The adapters also prevent adding additional lengths of cable unlike most solutions. The series adapters are...

Mini black T Connector pack (5 Pairs)Specs:Base Dimensions: 5mm x 8mmContact Dimension: 3mm x 5mm x 1mmRating: 10amps continuous

Black is the new Orange! The all-new RotorX DSMX and DSM2 JR module Transmitter. Fits into the Tango like a dream, improved range and compatibility with DSMX over the V1 OrangeRX Modules! Compatible with the TBS X-Racer Compatible with RotorX Atom V2 BNF

This harness connects two battery packs in Series. For example, you can make 2 x 2200mAh 11.1v 3S1P packs into a single 2200mAh 22.2v 6S1P pack. Its an excellent and cheap way of buying larger lipos.It also means that if you have a crash and damage...

EC3 Battery Harness 14AWG for 2 Packs in Series

EC3 Male - Tamiya Female

This adapter will convert an HXT 4mm equipped battery to an XT60 for use with an XT60 equipped ESC or Charge lead.Spec:Weight: 10g(Each)

HXT 4mm to T-Connector Battery Adapter Lead (2pc)This adapter will convert an HXT 4mm equipped battery to a T-Connector for use with a T-Connector equipped ESC or Charge lead.Spec:Weight: 7g (Each)

T-Connectors Male (10pcs/Bag) Made from heat resistant Nylon.Pack includes 10 Male.These connectors are made from Nylon, making them very tough and difficult to melt, even with the worst of soldering skills.

This is an ImmersionRC SpiroNET 5.8GHz 13dBi "Left Hand" Circular Polarized Patch Antenna. Custom designed for the FPV market, the SpiroNET 13dBi patch antenna was developed to offer a high gain alternative to the popular SpiroNET omni directional antennas. Using this patch antenna mounted...

This is a Heli-Star 90 Degree Turn RP-SMA Adapter. Specifications: Connector Type: One end: external thread and internal needle The other end: internal thread and internal needle Operation Temperature: - 40°C ~ + 65°C Storage Temperature - 40°C ~ + 80°C 

This is a Heli-Star 90 Degree Turn SMA Adapter.