The OrangeRx GA400F has all the properties and features of the original FASST compatible receivers but this one has 2 operating modes. Mode A gives the standard 4ch operation, Mode B gives CH1, CH2, RSSI and SBus. Another feature of this receiver is that it has "Normal Mode" and a "High Speed" mode. Normal mode is for standard analog servos and equipment and high speed mode is for digital servos. Do not use high speed mode for analog servos otherwise they will get hot and burn out.
The S.Bus functionality is an excellent feature for use with multi-rotor flight controllers such as the KK2.1, APM, MultiWii and others. These single line connections remove the weight and mess of additional wire leads for each individual channel. This is ideal for use on small frames where space is at a premium and keeps all the wiring neat and tidy.
RSSI (Receiver Signal Strength Indicator) is a fantastic feature to put through the OSD of your FPVrig. The receiver has a chip installed that is connected to the RSSI output which gives an analog signal that gets stronger the better reception you have.
The receiver will also accept a wide range of input voltages from 3.5~8.4V which is great if you want to use LV and HV type servos.
Compatible with the following Futaba FASST 2.4Ghz air systems such as TM7, TM8, TM10, TM14, 6EX, 7C, 8FG, 10CG, 12FG, 14SG, 18MZ etc.
• Lightweight (3.5g)
• Compatible with FASST 2.4Ghz air systems
• 4 channels
• 2 Output modes, Mode A and Mode B
• SBus and RSSI
• Normal and high speed modes
• Compact design (37 x 18.5 x 5.5mm)
• Failsafe and battery failsafe
• Improved anti-interference capability
Input Voltage: 3.5~8.4V
Battery Failsafe Voltage: 3.8V
Dimensions: 37 x 18.5 x 5.5mm
Note: Do not use high speed mode for analog servos otherwise they will get hot and burn out.
Product Id: 9617000001-0